Specifications and instructions for use:
*Applicable coin diameter: 18mm~33mm
*Applicable coin thickness: 1.2mm~2.2mm
*Operating temperature: 0°C to 50°C
*Storage temperature: -30°C to 55°C
*Environmental humidity: 0-95% relative humidity
*Working voltage: normal 12VDC
- Replace the metal coin to be screened and clamp it properly.
- Place the coin to be screened on the coin slot, from left to right, finger pinch to adjust the size of the coin slot until the coin slides down smoothly, such as
This prevents large coins from entering the body by mistake and causing blockage.
- Wiring instructions:
-White wire-Normally closed (N.C.) according to the specifications of the host, choose a signal wire
-Green Line-Normally Open (N.O.)
-Gray line -Code table
-Yellow line -Prohibited line (low potential +1V or less)
-Red wire-DC+12V power cord
-Black wire -Ground wire (GND)
●Forbidden wire to connect the output terminal on the motherboard to accept the instructions of the host. According to the needs of the host, you can “stop collecting coins”, which is convenient for the vending machine.
For gift machines and claw machines, when there are no more goods for sale or games in the machine, the coin collection will be stopped and the coins invested by consumers will be returned.
- To meet the needs of the motherboard, the three-stage switch selects and switches the count trigger pulse length (pulse trigger time).
Long pulse wave-100 milliseconds (100ms)
Mid pulse wave -50 milliseconds (50ms)
Short pulse wave -20 milliseconds (20ms)
- The VR knob is used to adjust the sensitivity of coin selection. Rotate clockwise (+) to select a wider coin, and counterclockwise (-) to adjust it more accurately.